Make the daily grind easier with 950W of power from the Silverline 115mm Angle Grinder. Compatible with a wide range of 4½" cutting and grinding discs, its 11,000rpm no load speed allows cuts in metals, tiles, cement and even concrete.
Users have commented on the great control afforded to them by this 115mm Angle Grinder, mostly due to the slightly longer than usual base, which enables good grip with both hands. The additional 3-position side handle gives even more leverage and control where extra pressure is required on harder materials.
This particular model comes with two separate safety guards - one for grinding discs and one for cutting, which are specifically designed to minimise the chance of user injury, as well as to block flying debris.
As well as the specialist safety guards, the Silverstorm grinder features an impressive 2-stage on/off switch, which eliminates the risk of accidental engagement of the blade and therefore the possibility of damage or injury. A spindle lock feature will, when engaged, stop the blade from spinning and provides an added element of trust when removing and replacing blades.
At just 1.9kg, the Silverline 115mm angle grinder is highly manoeuvrable, allowing you to get into an efficient rhythm when hard at work. Why not add an accessory kit to your order, like Silverline's (code 633831), which includes cutting and grinding discs as well as a crimp cup, crimp brush and flap disc, to far increase your working capability.
3-position auxiliary handle increases user comfort and adapts to multiple work angles.
Includes 2 separate guards for use with cutting and grinding discs.
No load speed 11,000rpm.
Soft-grip handle.
2-stage on/off switch.
Weight 1.9kg.
Disc Diameter | 115mm |
IP Rating | IP20 |
Grinder Size | 115mm |
Power Voltage |
950W 230v 50Hz |
No Load Speed | 11,000rpm |
Number of Guards | 2 |
Product Weight | 1.9kg |
Power | 950W |
No Load Speed | 11,000rpm |
Disc Dia | 115mm |
Bore Dia | 22mm |
What's in the Box | 1 x 950W Angle Grinder 115mm 1 x Threaded Flange 1 x Inner Flange 1 x Auxiliary Handle 1 x Pin Spanner 1 x Grinding Guard 1 x Cutting Guard 1 x Instruction Manual |
Dimensions (m) | 0.12 (L) x 0.39 (W) x 0.12 (H) |
Weight (kg) | 2.69 |
Resin-bonded glass fibre reinforced aluminium oxide metal grinding discs for grinding ferrous and non-ferrous metals. Suitable for metal-grinding applications (not suitable for aluminium or brass). Compatible with 22.23mm bore angle grinders. Manufactured to EN12413 and MPA approved. Max 13,300rpm.
Oops, there was an error sending your query.
Please try again later