Knuth Plasma-Jet AirPro 1530 H SKU : 144030 plus ( Hypertherm Powermax 105 Sync Plasma Source 253405 ) Compact Cost Effective Plasma Cutter using Hypertherm Technology (1500 x 3000 mm Table)
Knuth Plasma-Jet AirPro 1530 HSKU : 144030 plus ( Hypertherm Powermax 105 Sync Plasma Source 253405 )
Compact Cost Effective Plasma Cutter using Hypertherm Technology (1500 x 3000 mm Table)
Availability 5 months lead time to site. Subject to no prior orders.
Highlights
The machines of the Plasma-Jet AirPro H series provide you with good cutting quality with minimal operating costs. The economical cutting systems for air plasma sources were developed as a cost-effective solution for small manufacturers, and thanks to their compact design and small footprint are the perfect choice for workshops. All machines in this series are equipped with the latest technology and work extremely reliably.
- Compact one-piece design for space saving and easy relocation
- High cutting quality using USA Hypertherm technology
- Designed for air plasma sources for min. operational cost
- Very low maintenance
Construction
- Compact design with guides integrated into the table frame
- Plasma cutting system for personal use providing high value at a lost cost
- Machine can be moved and transported in its fully assembled state
- The machine has a segment-wise suction of the working surface, whereby the respective suction flap is opened mechanically by the machine bridge passing.
Transmission and drives
- Careful selection of the optimum components ensures that the same cutting functionality is available as in large plasma cutting systems
- Dynamic AC servo drives from Panasonic on all axes with maintenance-free, zero-backlash planetary gears
- The drives on both sides of the machine bridge and the drive of the X-slide along the machine bridge are carried out in a permanently precise manner by helical rack and pinion
- Linear guide ways from on all axes, designed for long life and smooth motion even at high speeds. The width of linear guides on X/Y axes is 20/20 mm
Cutting head
- The distance between plasma cutting nozzle and plate surface is maintained by the Z axis height control; height control is regulated by an electric arc
- Plasma cutter head with collision guard
Control
- CNC controller from Hypertherm - Edge CONNECT
- The ProNest LT Software is delivered as standard.
- Select the plasma source from the options
- Powermax 105 Sync plasma source( cutting capacity recommended; 32 mm 500 mm/min,38 mm 250 mm/min,seperating cut; 50mm 125 mm/min,piercing;22mm
Note: All specified cutting and piercing depths are dependent on the material as well as the cutting technology and guide system
Controls & Software
Hypertherm EDGE® Connect
- EDGE® Connect, Hypertherm’s newest Computer Numeric Control (CNC) platform, delivers unmatched reliability, powerful embedded capabilities, and a high level of customizability
- With Patented CutPro® Wizard, even new operators can be cutting production parts in less than five minutes
- On-screen Software Operator’s Console (Soft OpCon) allows easy setup and operation of cutting station and manual motion
- Integrated communications with plasma and torch height control systems deliver automated and expert control using installed factory or custom cut charts
- Custom cut charts can be created and controlled in the part program or made available to the CutPro Wizard
- EDGE Connect runs on the Windows® 10 Enterprise operating system
Phoenix® buit-in software
- Phoenix® software is the core operational interface and is common across the entire Hypertherm family of CNC systems
- Contains built-in cut charts for automatically setting process parameters for mild steel, stainless, and aluminum to enable consistently optimized cutting performance
- The wizards and diagnostic support tools enable easy setup, use and rapid troubleshooting
- Built-in help and cutting optimization tips for improving table performance and process outcomes at the touch of a button
Technical Details
| WORKING AREA | |
|---|---|
| Cutting Width | 1550 mm |
| Cutting length | 3050 mm |
| Table height | 600 mm |
| Table load capacity | 345 kg/m2 |
| Rapid feed | 15000 mm/min |
| Plasma source | Hypertherm |
| MEASURES AND WEIGHTS | |
|---|---|
| Weight | 1700 kg |
Hypertherm Power Max 105 Sync Plasma Source
Cutting Capacity In Plain Mild Steel
| Capacity | Thickness | Cut speed |
|---|---|---|
| Recommended | 32 mm | 500 mm/min (20 ipm) |
| 38 mm | 250 mm/min (10 ipm) | |
| Severance (hand cutting) | 50 mm (2″) | 125 mm/min (5 ipm) |
| Pierce* | 22 mm (3/4″) |
*Pierce rating for handheld cutting, or mechanized cutting with programmable torch height control.
Standard Equipment
Table prepared for filter system (mechanical closure)
panasonic Servomotors qand drivers
automatic burner height control with Hypertherm THC sensor
cutting torch with magnetic coupling and crash sensor
Hypertherm Edge Connect CNC-Unit
19” touchscreen by ELO
Ethercat-E
laser pointer
3-jaw-chuck 178 mm
Powermax 105 Sync plasma source SKU: 253888 ( Included in our quoted price)
Optional Equipment
A wide range of customised solutions is available. Please contact us for further details, price and delivery information.
Operator Training
Operator training available in showroom subject to quotation prior to delivery.
Email us to outline your needs.
Shipping
Fully inclusive shipping rates covering transportation , import customs documentation, duties quoted
for inclusion at time of order for UK mainland sites. Northern Ireland destinations, Islands and other remote
sites should seek advice prior to order via email. Clients will be responsible for their own site offload
and siting at point of use.
Installation Assistance
We will be pleased to offer a detailed quotation to cover this aspect of your investment subject to
being forwarded full details of site postcode, access, site conditions and floorspace availability.
Knuth technicians are busy worldwide and have experience in a wide variety of industrial facilities.
We are also likely to request provision of cranes, fork lift assistance etc by our clients as required.
Finance Availability
Looking to finance your equipment?
We have access to a variety of funding sources who will look sympathetically
at requests for funding finance.
These include leading merchant banks such as asset finance specialists Close Brothers and Lombard.
The financial services division of Siemens will consider HP on the investment. Subject to Status.
On an investment of this nature with a long delivery lead time we can also look at providing a staged payment schedule.
We will confirm this with you at time of order.
